If you would like to submit a testimonial for one of our products please send email to This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Alex from Norway

I have been using your CB2118-12 and truly feel it's better to handle than the OEM(12S3). --- Alex from Norway

Bill from NE

Today I got a bag of your CB1114 wads. WOW- they work great. --- Bill from NE

Jim from MT

I finally had an opportunity to try out the 20 gauge wads.  I was very impressed with both the 1075-20 and the 1078-20.  The 7/8oz work like a champ- after shooting them I purchased a case of 5000 from our gun club.  I also talked my 2 shooting partners into getting cases on order for their 20’s (I have a lot of reloading to do now!!!!)

I thank you for producing an excellent product at a reasonable price!  --- Jim from Bozeman, MT

Doug from GA

I started shooting 3/4 oz. 20 gauge loads in the late 70’s in an effort to save on shot, and to challenge myself.  Over the years, I’ve tried bottom filler wads, top wads, and other solutions to the abundance of space in the case. Most recently, after some experimentation with crimp starter and crimp die adjustment, I’d been using your CB 1078-20 without adding fillers.  I had pretty good success, but an occasional shell would still end up a “leaker”, and most of the crimps were dished.  A friend told me you’d solved the problem with your CB 1075-20, and I immediately bought a couple of thousand.  With no other changes to my loader or load, I started cranking out 20’s with that wild green wad, and they look and shoot beautifully.


Thanks for doing what no other manufacturer has done for us shooters!  I hope you make them for a long, long time.

Doug from Varnell, GA

Rich from PA

First off thank you for a great product.  I’ve been shooting CB wads for years and the performance is factory. - Rich from PA


Page 14 of 16


To receive additional information: J-Ron, Inc.
Customer Service: 800-922-6287

635 Bob Posey Street
Henderson, KY 42420


Harvester Muzzleloading