I started shooting 3/4 oz. 20 gauge loads in the late 70’s in an effort to save on shot, and to challenge myself.  Over the years, I’ve tried bottom filler wads, top wads, and other solutions to the abundance of space in the case. Most recently, after some experimentation with crimp starter and crimp die adjustment, I’d been using your CB 1078-20 without adding fillers.  I had pretty good success, but an occasional shell would still end up a “leaker”, and most of the crimps were dished.  A friend told me you’d solved the problem with your CB 1075-20, and I immediately bought a couple of thousand.  With no other changes to my loader or load, I started cranking out 20’s with that wild green wad, and they look and shoot beautifully.

Thanks for doing what no other manufacturer has done for us shooters!  I hope you make them for a long, long time.

Doug from Varnell, GA